Salem AL Fituri
30-05-2009, 15:06
السلام عليكم ورحمة الله وبركاته
قمت اليم بتتبث ماندريفا 2009 وكانت قمة في الروعة حيث تعرفت على اغلب الاجهزة لدية الا جهاز المودم الخاص باشتراك ال ADSL وهو HUAWEI SmartAX MT882 (https://www.huawei.com/products/terminal/products/view.do?id=121)حيث لا يظهر لي في قائمة كروت الشبكة ..
الا انه يظهر في Control Center على انه جهاز غير معروف ..:confused:
. https://i40.tinypic.com/9lfr7k.jpg
وبمساعدة من الاخ ĐΓ.ĐΣΓMλNN مشكورا أعطاني رابط لطريق تعريف المودم
Mandriva-Linux-con-el-Huawei-Mt810 (https://translate.google.com/translate?u=http%3A//www.taringa.net/posts/info/952074/Arnet-en-Mandriva-Linux-con-el-Huawei-Mt810.html&hl=en&langpair=auto%7Cen&tbb=1&ie=UTF-8)
ولكن تواجهني مشكلة في تطبيقه حيث امر make لا ينفد لدي
حيث نزلت الملفات
ueagle-atm-1.3.tar.gz
ueagle-data-1.1.tar.gz
br2684ctl-010226-1.i386.rpm
rp-pppoe-3.8.tar.gz
فككت الضغط عنهما ونفدت الامر su
cd ueagle-atm-1.3
make
bash: make: command not found
وجدت موضوع يتحدت عن تعريف نفس المودم هنـا (https://www.arabteam2000-forum.com/index.php?showtopic=102018&st=0)
نفس الشي امر make لا ينفد لدي
وهده نتيجة الامر make و tail -f /var/log/messages
[root@localhost MyName]# dmesg | grep ueagle
[root@localhost MyName]# cd /media/disk/Linux/Modem/New folder/ueagle-atm-1.3
bash: cd: /media/disk/Linux/Modem/New: No such file or directory
[root@localhost MyName]# cd /media/disk/Linux/Modem/Newfolder/ueagle-atm-1.3
[root@localhost ueagle-atm-1.3]# make
bash: make: command not found
[root@localhost ueagle-atm-1.3]# configure/.
bash: configure/.: No such file or directory
[root@localhost ueagle-atm-1.3]# ./configure
bash: ./configure: No such file or directory
[root@localhost ueagle-atm-1.3]# modprobe ueagle-atm
[root@localhost ueagle-atm-1.3]#
[root@localhost ueagle-atm-1.3]# tail -f /var/log/messages
May 29 21:28:54 localhost kernel: usb 3-3: configuration #1 chosen from 1 choice
May 29 21:28:54 localhost kernel: usb 3-3: New USB device found, idVendor=1110, idProduct=5c01
May 29 21:28:54 localhost kernel: usb 3-3: New USB device strings: Mfr=1, Product=0, SerialNumber=3
May 29 21:28:54 localhost kernel: usb 3-3: Manufacturer: MT882
May 29 21:28:54 localhost kernel: usb 3-3: SerialNumber: usb
May 29 21:30:01 localhost mdkapplet[3927]: Checking Network: seems disabled
May 29 21:33:15 localhost kernel: NET: Registered protocol family 8
May 29 21:33:15 localhost kernel: NET: Registered protocol family 20
May 29 21:33:15 localhost kernel: [ueagle-atm] driver ueagle 1.4 loaded
May 29 21:33:15 localhost kernel: usbcore: registered new interface driver ueagle-atm
tail -f /var/log/messages^Z
[1]+ Stopped tail -f /var/log/messages
[root@localhost ueagle-atm-1.3]# tail -f /var/log/messages
May 29 21:28:54 localhost kernel: usb 3-3: configuration #1 chosen from 1 choice
May 29 21:28:54 localhost kernel: usb 3-3: New USB device found, idVendor=1110, idProduct=5c01
May 29 21:28:54 localhost kernel: usb 3-3: New USB device strings: Mfr=1, Product=0, SerialNumber=3
May 29 21:28:54 localhost kernel: usb 3-3: Manufacturer: MT882
May 29 21:28:54 localhost kernel: usb 3-3: SerialNumber: usb
May 29 21:30:01 localhost mdkapplet[3927]: Checking Network: seems disabled
May 29 21:33:15 localhost kernel: NET: Registered protocol family 8
May 29 21:33:15 localhost kernel: NET: Registered protocol family 20
May 29 21:33:15 localhost kernel: [ueagle-atm] driver ueagle 1.4 loaded
May 29 21:33:15 localhost kernel: usbcore: registered new interface driver ueagle-atm
May 29 21:36:04 localhost drakconf.real[15812]: ### Program is starting ###
May 29 21:36:08 localhost drakconf.real[15819]: ### Program is starting ###
May 29 21:36:16 localhost drakconnect[15825]: ### Program is starting ###
May 29 21:36:22 localhost drakconnect[15825]: default cancel_clicked
May 29 21:36:24 localhost drakconnect[15825]: ### Program is exiting ###
May 29 21:36:27 localhost draknetcenter[16172]: ### Program is starting ###
May 29 21:36:33 localhost draknetcenter[16172]: ### Program is exiting ###
May 29 21:36:42 localhost harddrake2[16179]: ### Program is starting ###
May 29 21:36:43 localhost harddrake2[16179]: running: dmidecode
May 29 21:36:44 localhost harddrake2[16179]: dmraid::init failed
May 29 21:36:44 localhost harddrake2[16179]: HDIO_GETGEO on /dev/sda succeeded: heads=255 sectors=63 cylinders=4865 start=0
May 29 21:36:44 localhost harddrake2[16179]: HDIO_GETGEO on /dev/sdb succeeded: heads=255 sectors=63 cylinders=38913 start=0
May 29 21:36:44 localhost harddrake2[16179]: HDIO_GETGEO on /dev/sdc succeeded: heads=251 sectors=62 cylinders=1020 start=0
May 29 21:36:44 localhost harddrake2[16179]: id2hd: 0x878c878c=>sda 0x9d0b0606=>sdb 0x4db39036=>sdc
May 29 21:36:44 localhost harddrake2[16179]: id2edd: 0x878c878c=>/sys/firmware/edd/int13_dev80 0x9d0b0606=>/sys/firmware/edd/int13_dev81
May 29 21:36:44 localhost harddrake2[16179]: geometry_from_edd sdb 0x9d0b0606: 38913/255/63
May 29 21:36:44 localhost harddrake2[16179]: geometry_from_edd sda 0x878c878c: 4865/255/63
May 29 21:36:44 localhost harddrake2[16179]: test_for_bad_drives(/dev/sda on sector #62)
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sda
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sda
May 29 21:36:44 localhost harddrake2[16179]: found a dos partition table on /dev/sda at sector 0
May 29 21:36:44 localhost harddrake2[16179]: guess_geometry_from_partition_table sda: 4865/255/63
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sda1
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sda5
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sda6
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sda7
May 29 21:36:44 localhost harddrake2[16179]: test_for_bad_drives(/dev/sdb on sector #62)
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdb
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdb
May 29 21:36:44 localhost harddrake2[16179]: found a dos partition table on /dev/sdb at sector 0
May 29 21:36:44 localhost harddrake2[16179]: guess_geometry_from_partition_table sdb: 38913/255/63
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdb1
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdb2
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdb3
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdb5
May 29 21:36:44 localhost harddrake2[16179]: test_for_bad_drives(/dev/sdc on sector #61)
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdc
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdc
May 29 21:36:44 localhost harddrake2[16179]: found a dos partition table on /dev/sdc at sector 0
May 29 21:36:44 localhost harddrake2[16179]: guess_geometry_from_partition_table sdc: 99212/5/32
May 29 21:36:44 localhost harddrake2[16179]: is_geometry_valid_for_the_partition_table failed for (sdc1, 8064): 15,1,11 vs 0,130,4 with geometry 1020/251/62
May 29 21:36:44 localhost harddrake2[16179]: is_geometry_valid_for_the_partition_table failed for (sdc1, 15874047): 268,4,31 vs 1020,13,1 with geometry 1020/251/62
May 29 21:36:44 localhost harddrake2[16179]: is_geometry_valid_for_the_partition_table failed for (sdc1, 8064): 15,1,11 vs 50,2,0 with geometry 99212/5/32
May 29 21:36:44 localhost harddrake2[16179]: is_geometry_valid_for_the_partition_table failed for (sdc1, 15874047): 268,4,31 vs 1023,3,31 with geometry 99212/5/32
May 29 21:36:44 localhost harddrake2[16179]: sdc: argh! no valid geometry found
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdc1
May 29 21:36:44 localhost harddrake2[16179]: running: /bin/rpm -q --qf %{name} lib64alsa-plugins
May 29 21:36:44 localhost harddrake2[16179]: running: /bin/rpm -q --qf %{name} alsa-utils
May 29 21:36:44 localhost harddrake2[16179]: running: /bin/rpm -q --qf %{name} aoss
May 29 21:36:45 localhost harddrake2[16179]: running: /bin/rpm -q --qf %{name} libalsa-plugins
May 29 21:38:07 localhost kernel: usb 3-3: USB disconnect, address 3
May 29 21:38:24 localhost kernel: usb 3-3: new full speed USB device using ohci_hcd and address 4
May 29 21:38:24 localhost kernel: usb 3-3: configuration #1 chosen from 1 choice
May 29 21:38:24 localhost kernel: usb 3-3: New USB device found, idVendor=1110, idProduct=5c01
May 29 21:38:24 localhost kernel: usb 3-3: New USB device strings: Mfr=1, Product=0, SerialNumber=3
May 29 21:38:24 localhost kernel: usb 3-3: Manufacturer: MT882
May 29 21:38:24 localhost kernel: usb 3-3: SerialNumber: usb
ملاحظة وجدت باحدى المنتديات انه لازم تكون الكيرنل موجودة بالمسار /usr/src ولكن المجلد src لايحتوي على اي مجلد او ملف فهل ممكن ان تكون الكيرنل سورس غير موجودة عندي ..
حيث نزلت آخر اصدار للكيرنل والى الآن لا اعرف كيفية تتبثه (لعل يوجد بها حل لتعريف المودم)
هده ملفات الكيرنال الي نزلتهم
patch-2.6.30-rc7
patch-2.6.29.4
مع العلم اصدار الكيرنل لدي 2.6.26 آتية مع نسخة Manriva One 2009
قمت اليم بتتبث ماندريفا 2009 وكانت قمة في الروعة حيث تعرفت على اغلب الاجهزة لدية الا جهاز المودم الخاص باشتراك ال ADSL وهو HUAWEI SmartAX MT882 (https://www.huawei.com/products/terminal/products/view.do?id=121)حيث لا يظهر لي في قائمة كروت الشبكة ..
الا انه يظهر في Control Center على انه جهاز غير معروف ..:confused:
. https://i40.tinypic.com/9lfr7k.jpg
وبمساعدة من الاخ ĐΓ.ĐΣΓMλNN مشكورا أعطاني رابط لطريق تعريف المودم
Mandriva-Linux-con-el-Huawei-Mt810 (https://translate.google.com/translate?u=http%3A//www.taringa.net/posts/info/952074/Arnet-en-Mandriva-Linux-con-el-Huawei-Mt810.html&hl=en&langpair=auto%7Cen&tbb=1&ie=UTF-8)
ولكن تواجهني مشكلة في تطبيقه حيث امر make لا ينفد لدي
حيث نزلت الملفات
ueagle-atm-1.3.tar.gz
ueagle-data-1.1.tar.gz
br2684ctl-010226-1.i386.rpm
rp-pppoe-3.8.tar.gz
فككت الضغط عنهما ونفدت الامر su
cd ueagle-atm-1.3
make
bash: make: command not found
وجدت موضوع يتحدت عن تعريف نفس المودم هنـا (https://www.arabteam2000-forum.com/index.php?showtopic=102018&st=0)
نفس الشي امر make لا ينفد لدي
وهده نتيجة الامر make و tail -f /var/log/messages
[root@localhost MyName]# dmesg | grep ueagle
[root@localhost MyName]# cd /media/disk/Linux/Modem/New folder/ueagle-atm-1.3
bash: cd: /media/disk/Linux/Modem/New: No such file or directory
[root@localhost MyName]# cd /media/disk/Linux/Modem/Newfolder/ueagle-atm-1.3
[root@localhost ueagle-atm-1.3]# make
bash: make: command not found
[root@localhost ueagle-atm-1.3]# configure/.
bash: configure/.: No such file or directory
[root@localhost ueagle-atm-1.3]# ./configure
bash: ./configure: No such file or directory
[root@localhost ueagle-atm-1.3]# modprobe ueagle-atm
[root@localhost ueagle-atm-1.3]#
[root@localhost ueagle-atm-1.3]# tail -f /var/log/messages
May 29 21:28:54 localhost kernel: usb 3-3: configuration #1 chosen from 1 choice
May 29 21:28:54 localhost kernel: usb 3-3: New USB device found, idVendor=1110, idProduct=5c01
May 29 21:28:54 localhost kernel: usb 3-3: New USB device strings: Mfr=1, Product=0, SerialNumber=3
May 29 21:28:54 localhost kernel: usb 3-3: Manufacturer: MT882
May 29 21:28:54 localhost kernel: usb 3-3: SerialNumber: usb
May 29 21:30:01 localhost mdkapplet[3927]: Checking Network: seems disabled
May 29 21:33:15 localhost kernel: NET: Registered protocol family 8
May 29 21:33:15 localhost kernel: NET: Registered protocol family 20
May 29 21:33:15 localhost kernel: [ueagle-atm] driver ueagle 1.4 loaded
May 29 21:33:15 localhost kernel: usbcore: registered new interface driver ueagle-atm
tail -f /var/log/messages^Z
[1]+ Stopped tail -f /var/log/messages
[root@localhost ueagle-atm-1.3]# tail -f /var/log/messages
May 29 21:28:54 localhost kernel: usb 3-3: configuration #1 chosen from 1 choice
May 29 21:28:54 localhost kernel: usb 3-3: New USB device found, idVendor=1110, idProduct=5c01
May 29 21:28:54 localhost kernel: usb 3-3: New USB device strings: Mfr=1, Product=0, SerialNumber=3
May 29 21:28:54 localhost kernel: usb 3-3: Manufacturer: MT882
May 29 21:28:54 localhost kernel: usb 3-3: SerialNumber: usb
May 29 21:30:01 localhost mdkapplet[3927]: Checking Network: seems disabled
May 29 21:33:15 localhost kernel: NET: Registered protocol family 8
May 29 21:33:15 localhost kernel: NET: Registered protocol family 20
May 29 21:33:15 localhost kernel: [ueagle-atm] driver ueagle 1.4 loaded
May 29 21:33:15 localhost kernel: usbcore: registered new interface driver ueagle-atm
May 29 21:36:04 localhost drakconf.real[15812]: ### Program is starting ###
May 29 21:36:08 localhost drakconf.real[15819]: ### Program is starting ###
May 29 21:36:16 localhost drakconnect[15825]: ### Program is starting ###
May 29 21:36:22 localhost drakconnect[15825]: default cancel_clicked
May 29 21:36:24 localhost drakconnect[15825]: ### Program is exiting ###
May 29 21:36:27 localhost draknetcenter[16172]: ### Program is starting ###
May 29 21:36:33 localhost draknetcenter[16172]: ### Program is exiting ###
May 29 21:36:42 localhost harddrake2[16179]: ### Program is starting ###
May 29 21:36:43 localhost harddrake2[16179]: running: dmidecode
May 29 21:36:44 localhost harddrake2[16179]: dmraid::init failed
May 29 21:36:44 localhost harddrake2[16179]: HDIO_GETGEO on /dev/sda succeeded: heads=255 sectors=63 cylinders=4865 start=0
May 29 21:36:44 localhost harddrake2[16179]: HDIO_GETGEO on /dev/sdb succeeded: heads=255 sectors=63 cylinders=38913 start=0
May 29 21:36:44 localhost harddrake2[16179]: HDIO_GETGEO on /dev/sdc succeeded: heads=251 sectors=62 cylinders=1020 start=0
May 29 21:36:44 localhost harddrake2[16179]: id2hd: 0x878c878c=>sda 0x9d0b0606=>sdb 0x4db39036=>sdc
May 29 21:36:44 localhost harddrake2[16179]: id2edd: 0x878c878c=>/sys/firmware/edd/int13_dev80 0x9d0b0606=>/sys/firmware/edd/int13_dev81
May 29 21:36:44 localhost harddrake2[16179]: geometry_from_edd sdb 0x9d0b0606: 38913/255/63
May 29 21:36:44 localhost harddrake2[16179]: geometry_from_edd sda 0x878c878c: 4865/255/63
May 29 21:36:44 localhost harddrake2[16179]: test_for_bad_drives(/dev/sda on sector #62)
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sda
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sda
May 29 21:36:44 localhost harddrake2[16179]: found a dos partition table on /dev/sda at sector 0
May 29 21:36:44 localhost harddrake2[16179]: guess_geometry_from_partition_table sda: 4865/255/63
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sda1
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sda5
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sda6
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sda7
May 29 21:36:44 localhost harddrake2[16179]: test_for_bad_drives(/dev/sdb on sector #62)
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdb
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdb
May 29 21:36:44 localhost harddrake2[16179]: found a dos partition table on /dev/sdb at sector 0
May 29 21:36:44 localhost harddrake2[16179]: guess_geometry_from_partition_table sdb: 38913/255/63
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdb1
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdb2
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdb3
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdb5
May 29 21:36:44 localhost harddrake2[16179]: test_for_bad_drives(/dev/sdc on sector #61)
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdc
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdc
May 29 21:36:44 localhost harddrake2[16179]: found a dos partition table on /dev/sdc at sector 0
May 29 21:36:44 localhost harddrake2[16179]: guess_geometry_from_partition_table sdc: 99212/5/32
May 29 21:36:44 localhost harddrake2[16179]: is_geometry_valid_for_the_partition_table failed for (sdc1, 8064): 15,1,11 vs 0,130,4 with geometry 1020/251/62
May 29 21:36:44 localhost harddrake2[16179]: is_geometry_valid_for_the_partition_table failed for (sdc1, 15874047): 268,4,31 vs 1020,13,1 with geometry 1020/251/62
May 29 21:36:44 localhost harddrake2[16179]: is_geometry_valid_for_the_partition_table failed for (sdc1, 8064): 15,1,11 vs 50,2,0 with geometry 99212/5/32
May 29 21:36:44 localhost harddrake2[16179]: is_geometry_valid_for_the_partition_table failed for (sdc1, 15874047): 268,4,31 vs 1023,3,31 with geometry 99212/5/32
May 29 21:36:44 localhost harddrake2[16179]: sdc: argh! no valid geometry found
May 29 21:36:44 localhost harddrake2[16179]: running: vol_id /dev/sdc1
May 29 21:36:44 localhost harddrake2[16179]: running: /bin/rpm -q --qf %{name} lib64alsa-plugins
May 29 21:36:44 localhost harddrake2[16179]: running: /bin/rpm -q --qf %{name} alsa-utils
May 29 21:36:44 localhost harddrake2[16179]: running: /bin/rpm -q --qf %{name} aoss
May 29 21:36:45 localhost harddrake2[16179]: running: /bin/rpm -q --qf %{name} libalsa-plugins
May 29 21:38:07 localhost kernel: usb 3-3: USB disconnect, address 3
May 29 21:38:24 localhost kernel: usb 3-3: new full speed USB device using ohci_hcd and address 4
May 29 21:38:24 localhost kernel: usb 3-3: configuration #1 chosen from 1 choice
May 29 21:38:24 localhost kernel: usb 3-3: New USB device found, idVendor=1110, idProduct=5c01
May 29 21:38:24 localhost kernel: usb 3-3: New USB device strings: Mfr=1, Product=0, SerialNumber=3
May 29 21:38:24 localhost kernel: usb 3-3: Manufacturer: MT882
May 29 21:38:24 localhost kernel: usb 3-3: SerialNumber: usb
ملاحظة وجدت باحدى المنتديات انه لازم تكون الكيرنل موجودة بالمسار /usr/src ولكن المجلد src لايحتوي على اي مجلد او ملف فهل ممكن ان تكون الكيرنل سورس غير موجودة عندي ..
حيث نزلت آخر اصدار للكيرنل والى الآن لا اعرف كيفية تتبثه (لعل يوجد بها حل لتعريف المودم)
هده ملفات الكيرنال الي نزلتهم
patch-2.6.30-rc7
patch-2.6.29.4
مع العلم اصدار الكيرنل لدي 2.6.26 آتية مع نسخة Manriva One 2009