ابوصالح
11-12-2009, 01:50
السلام عليكم ورحمة الله وبركاته
اخواني :
ابغى شرح لبرنامج Tftpd32 (https://tftpd32.jounin.net/) الذي يقوم بعمل فورمات عبر الشبكه
انا حصلت الشرح لكن بالانكليزي وانا والانكليزي و بلانكليزي المعرب على هذي الروابط لكن ماضبط الوضع معي يمكن نسيت خطوه مهمه
https://blog.webpirates.co.uk/?p=56&lang=ar
https://blog.ryantadams.com/2008/02/01/how-to-boot-from-the-network-pxe-boot-with-tftp-and-windows-pe/
ايضاًوجدت هذي الطريقه
OK, so PXE appears to be the only way.
You need to setup a PXE server, prepare on it the install files, than boot through PXE to it.
I had some success in the past following this method:
https://winner.windowsdream.com/ (https://winner.windowsdream.com/)
Go to the howto:
https://winner.windowsdream.com/winner/howto.html (https://winner.windowsdream.com/winner/howto.html)
Read it thoroughfully, see if everything makes sense, if not post here your perplexities, we'll see if we can answer to them.
As said, this is a little more complex that just setting a PXE server, refer to second part of this page:
https://winner.windowsdream.com/winner/doc/pxe.html (https://winner.windowsdream.com/winner/doc/pxe.html)
and to this page:
https://home.allegiance.tv/~joem298/ (https://home.allegiance.tv/%7Ejoem298/)
and "serve" through memdisk a "network enabled" DOS bootdisk image, such as the very good one here:
https://www.netbootdisk.com/ (https://www.netbootdisk.com/)
Then copy to the laptop HD (on a partition formatted as FAT16 or FAT32) the *******s of the \I386 directory of a (SP2 slipstreamed) XP install CD.
Then you run WINNT.EXE and you have a "normal" DOS based install.
او اللي عنده برنامج او طريقه تؤدي نفس الغرض يا ليت يفيدنا
ومشكوووووووورين مقدماً
اخواني :
ابغى شرح لبرنامج Tftpd32 (https://tftpd32.jounin.net/) الذي يقوم بعمل فورمات عبر الشبكه
انا حصلت الشرح لكن بالانكليزي وانا والانكليزي و بلانكليزي المعرب على هذي الروابط لكن ماضبط الوضع معي يمكن نسيت خطوه مهمه
https://blog.webpirates.co.uk/?p=56&lang=ar
https://blog.ryantadams.com/2008/02/01/how-to-boot-from-the-network-pxe-boot-with-tftp-and-windows-pe/
ايضاًوجدت هذي الطريقه
OK, so PXE appears to be the only way.
You need to setup a PXE server, prepare on it the install files, than boot through PXE to it.
I had some success in the past following this method:
https://winner.windowsdream.com/ (https://winner.windowsdream.com/)
Go to the howto:
https://winner.windowsdream.com/winner/howto.html (https://winner.windowsdream.com/winner/howto.html)
Read it thoroughfully, see if everything makes sense, if not post here your perplexities, we'll see if we can answer to them.
As said, this is a little more complex that just setting a PXE server, refer to second part of this page:
https://winner.windowsdream.com/winner/doc/pxe.html (https://winner.windowsdream.com/winner/doc/pxe.html)
and to this page:
https://home.allegiance.tv/~joem298/ (https://home.allegiance.tv/%7Ejoem298/)
and "serve" through memdisk a "network enabled" DOS bootdisk image, such as the very good one here:
https://www.netbootdisk.com/ (https://www.netbootdisk.com/)
Then copy to the laptop HD (on a partition formatted as FAT16 or FAT32) the *******s of the \I386 directory of a (SP2 slipstreamed) XP install CD.
Then you run WINNT.EXE and you have a "normal" DOS based install.
او اللي عنده برنامج او طريقه تؤدي نفس الغرض يا ليت يفيدنا
ومشكوووووووورين مقدماً