Ahmed Elbrbry
17-04-2011, 20:06
سوف نقوم بمساعدة الاعضاء فى عمليات كسر السرعة من خلال BIOS عن طريق وضع TEMPLATE لمعظم او اشهر اللوحات
وذلك لتسهيل عملية الشرح من خلال هذه ال قوالب
و ستكون هذه القوالب على الوضع الافتراضى كل ما نقوم به هو نسخها الى الموضوع مع ذكر الاتى
1- المعالج - النوع - رقم الموديل
2- الذواكر - النوع - الموديل - التردد - الناقل
لكى تسهل على الاخوة المحترفين عملية الشرح
و سوف يتم تحديث هذه القوالب بأستمرار
سوف نبدأ اولا بلوحات GIGABYTE
بالنسبة للوحات X58
Advanced CPU Features:
CPU Clock Ratio ................................ [20x]
Intel(R) Turbo Boost Tech .................. [Enabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Enabled]
CPU Enhanced Halt (C1E) ................... [Disabled]
C3/C6/C7 State Support .................... [Disabled]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ............................ [Disabled]
Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
Bi-Directional PROCHOT ..................... [Enabled]
Uncore & QPI Features:
QPI Link Speed .............................. x36
Uncore Frequency .......................... (Always 2x memory Multi or 2x +1)
Isonchronous Frequency ..................[Enabled]
Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) .....................
PCI Express Frequency (MHz) ........... [100]
C.I.A.2 [Disabled]
Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]
Advanced DRAM Features:
Performance Enhance ...................... [Standard]
Extreme Memory Profile (X.M.P) ......... [Disabled]
System Memory Multiplier (SPD) ........ [AUTO]
DRAM Timing Selectable (SPD) .......... [Manual]
Channel A + B + C
Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................
tRCD .......................................
tRP .........................................
tRAS .......................................
##Channel A Advanced Timing Control##
tRC ........................................ (Should be = tRAS + tRP or above for stability)
tRRD .......................................
tWTR ...................................... (Must be Write to Read Delay/Same Rank - (tWL + 4)
tWR ........................................
tWTP ....................................... (tWTP Must = tWR + tWL + 4)
tWL ........................................ (tWL Must be CAS Latency -1)
tRFC .......................................
tRTP .......................................
tFAW ......................................
Command Rate (CMD) ................
##Channel A Misc Timing Control##
Round Trip Latency ...................
B2B CAS Delay ..........................
Advanced Voltage Control:
CPU
Load Line Calibration ................. [Disabled]
CPU Vcore ...............................
QPI/VTT Voltage 1.150v ............
CPU PLL 1.800v .......................
MCH/ICH
PCIE 1.500v ...........................
QPI PLL 1.100v .......................
IOH Core 1.100v .....................
ICH I/O 1.500v .......................
ICH Core 1.1v ........................
DRAM
DRAM Voltage 1.500v ..............
DRAM Termination 0.750v [AUTO]
Ch-A Data VRef. 0.750v [AUTO]
Ch-B Data VRef. 0.750v [AUTO]
Ch-C Data VRef. 0.750v [AUTO]
Ch-A Address VRef. 0.750v [AUTO]
Ch-B Address VRef. 0.750v [AUTO]
Ch-C Address VRef. 0.750v [AUTO]
اما اللوحات P55 & P57
Advanced Frequency Settings:
CPU Clock Ratio 21x
Advanced Core Features [Press Enter]:
Intel(R) Turbo Boost Tech................[Disabled]
CPU Cores Enabled........................[All]
CPU Multi-Threading......................[Disabled]
CPU Enhanced Halt (C1E)..................[Auto]
C3/C6/C7 State Support...................[Auto]
CPU Thermal Monitor......................[Auto]
CPU EIST Function........................[Auto]
Bi-Directional PROCHOT...................[Auto]
QPI Clock Ratio..........................[Auto]
QPI Link Speed........................[x]
Uncore Clock Ratio....................[18x]
Uncore Frequency.........................3600MHz
>>>>> Standard Clock Control <<<<<
Base Clock (BCLK) Control................[Enabled]
BCLK Frequency ..........................[200]
Extreme Memory Profile (X.M.P.)..........[Disabled]
System Memory Multiplier (SPD)...........[Disabled]
Memory Frequency (MHz)................2000
PCI Express Frequency (MHz)..............[Auto]
C.I.A.2..................................[Disabled]
>>>>> Advanced Clock Control <<<<<
CPU Clock Drive..........................[ 800mV]
PCI Express Clock Drive..................[ 900mV]
CPU Clock Skew...........................[ 0ps]
Advanced Memory Settings:
Extreme Memory Profile (X.M.P.)..........[Disabled]
System Memory Multiplier (SPD)...........[10.0]
Memory Frequency (MHz)................2000
Performance Enhance (SPD)............. [Turbo]
DRAM Timing Selectable (SPD)............ [Expert]
Profile DDR Voltage ..................
Profile QPI Voltage ..................
Channel Interleaving.....................[Auto]
Rank Interleaving........................[Auto]
>>>>> Channel A & B
Channel A Timing Settings [Press Enter]:
Cas Latency Time........................[8]
tRCD....................................[8]
tRP.....................................[9]
tRAS...................................[24]
>>>>> Advanced Timing Control
tRC....................................[Auto]
tRRD...................................[Auto]
tWTR...................................[Auto]
tWR....................................[Auto]
tWTP...................................[Auto]
tWL....................................[Auto]
tRFC...................................[Auto]
tRTP...................................[Auto]
tFAW...................................[Auto]
Command Rate (CMD).................. 1 [1]
>>>>> Misc Timing Control
B2B Cas Delay..........................[Auto]
Round Trip Latency.....................[Auto]
Channel A Turnaround Settings [Press Enter]:
Different DIMMs........................[Auto]
Different DIMMs........................[Auto]
On The Same Rank.......................[Auto]
>>>>> Channel A Writes Followed By Writes
Different DIMMs........................[Auto]
Different DIMMs........................[Auto]
On The Same Rank.......................[Auto]
Advanced Voltage Settings:
******Mother Board Voltage Control ******
Voltage Types............Normal......Current
--------------------------------------------
>>> CPU
Load Line Calibration...................[Level 2]
CPU Vcore..................1.19375v..[1.xv]
QPI/VTT Voltage..........1.100v.....[1.x00v]
>>> MCH/ICH
PCH Core....................1.050v.....[Auto]
CPU PLL......................1.800v.....[Auto]
>>> DRAM
DRAM Voltage..............1.500v.....[1.660v]
DRAM Termination.........0.750v.....[Auto]
Ch-A Data VRef............0.750v.....[Auto]
Ch-A Data VRef............0.750v.....[Auto]
Ch-B Data VRef............0.750v.....[Auto]
Ch-B Data VRef............0.750v.....[Auto]
Miscellaneous Settings:[/SIZE]
Isochronous Support....................[Enabled]
Virtualisation technology..............[Enabled]
USB Storage Detect ....................[Disabled] Located In Integrated Peripherals Page
P45 / P43
وأيضا متشابهة الى حد ما مع G45/G43
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto or Fast
CPU Clock Ratio ..........................:
Fine CPU Clock Ratio.....................:.0
CPU Frequency ...........................:
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: Mhz
PCI Express Frequency (Mhz) .........:Set to 100
C.I.A.2 .................................:[Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: <<< 800
PCI Express Clock Drive.................: <<< 900
CPU Clock Skew (ps)....................: <<<
MCH Clock Skew (ps)...................: <<<
DRAM Performance Control
Performance Enhance...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: [Auto]
System Memory Multiplier ..............:
Memory Frequency (Mhz) ..............:
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time........................
tRCD .........................................
tRP'...........................................
tRAS..........................................
Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go
Advanced Timing Control
tRRD...........................................
tWTR..........................................
tWR............................................
tRFC...........................................
tRTP...........................................
Command Rate (CMD) ....................:2
Driving Strength Profiles
Driving Strength ............................
Channel A
Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
Channel B
Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
Motherboard Voltage Control
CPU
CPU Vcore….……….........................:Auto if not overclocking, if you are overclocking please do find and set your own voltages
CPU Termination…..... 1.200V*.......: << If overclocking Please set to stock, Auto overvolts this way to much. Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore. Auto is fine if not overclocking
CPU PLL…………………....1.500V*.......: << If overclocking Please set to stock, Auto overvolts this way to much. Optimal range for overclock would be 1.5-1.65. Auto is fine if not overclocking
CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly
CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly
MCH/ICH
MCH Core…………….....1.100V...........: <<
MCH Reference….…….0.760V...........; <<< Leave
MCH/DRAM Ref.…......0.900V...........: <<< Leave
ICH I/O……………….....1.500V............: <<< Leave
ICH Core…………...……1.100V............: <<< Leave
DRAM
DRAM Voltage ……....1.800V............:
DRAM Termination .…0.900V............: <<< Leave
Channel A Reference 0.900V............: <<< Leave
Channel B Reference 0.900V............: <<< Leave
Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
Integrated Peripherals
Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
X35 / X38 / X48
و ايضا تتشابه مع P31/G31/965P
Robust Graphics Booster___________ [Auto]
CPU Clock Ratio ____________ [8]
Fine Clock Ratio ____________[0.5]
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ [450]
PCI Express Frequency (Mhz)_______ [100]
C.I.A. 2__________________________ [Disabled]
System Memory Multiplier (SPD)____ [2.00]
DRAM Timing Selectable_______ SPD __ [Manual]
Performance Enhance = [Standard]
CAS Latency Time________________
Dram RAS# to CAS# Delay_________
Dram RAS# Precharge Delay_______
Precharge Delay (tRAS)__________
ACT to ACT Delay (tRRD)_________
Rank Write to READ Delay________
Write to Precharge Delay_________
Refresh to ACT Delay______________
Read to Precharge Delay__________
Static tRead Value_______________
Static tRead Phase Adjust________ [Auto]
CPU/PCIEX Clock Driving Control [800mV]
CPU Clock Skew Control [normal]
GMCH Clock Skew Control [Normal]
System Voltage Control____ [Manual]
DDR2 OverVoltage Control__ [+0.300V]
PCI-E OverVoltage Control_ [+0.1V]
FSB OverVoltage Control___ [+0.1V]
(G)MCH OverVoltage Control [+0.1V]
CPU Voltage Control_______ [1.25]
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
Integrated Peripherals
Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB
ننتقل الى Asus Rampage III Extreme
Target CPU Frequency 2666MHz
Target DRAM Frequency 1603MHz
LN2 Mode: Disabled***
QPI Loadline Calibration: Enabled
***Sync Mode [Enabled]
AI Overclock Tuner [Manual]
OC From CPU level Up [Auto]
CPU Ratio Setting [20.0]
CPU Turbo Power Limit [Disabled]
>CPU Configuration-
CPU Ratio Setting [20.0]
C1E Support [Enabled]
Hardware Prefetcher [Enabled]
Adjacent Cache Line Prefetcher [Enabled]
Intel(R) Virtualiyation Tech [Enabled]
CPU TM Function [Disabled]
Execute Disable Bit [Enabled]
Intel(R) HT Technology [Enabled]
Active Processor Cores [All]
A20M [Disabled]
Intel(R) SpeedStep(TM) Tech [Enabled]
Intel(R) C-STATE Tech [Enabled]
C State package limit setting [Auto]-
BCLK Frequency [133]
PCIE Frequency [100]
DRAM Frequency [1603]
UCLK Frequency [3209]
QPI Link Data Rate [AUTO]
Memory Configuration Protect [Disabled]
>DRAM Timing Control
CAS# Latency 9 [9]
RAS# to CAS# Delay 9 [9]
RAS# PRE Time 9 [9]
RAS# ACT Time 24 [24]
RAS# to RAS# Delay 6 [AUTO]
REF Cycle Time 110 [110]
WRITE Recovery Time 15 [15]
READ to PRE Time 9 [9]
FOUR ACT WIN Time 31 [31]
Back-To-BackCAS# Delay 0 [Auto]
Timing Mode 1N [1N]
Round Trip Latency on CHA [AUTO]
Round Trip Latency on CHB [AUTO]
Round Trip Latency on CHC [AUTO]
WRITE To READ Delay(DD) 8 [Auto]
WRITE To READ Delay(DR) 8 [Auto]
WRITE To READ Delay(SR) 18 [Auto]
READ To WRITE Delay(DD) 7 [Auto]
READ To WRITE Delay(DR) 7 [Auto]
READ To WRITE Delay(SR) 7 [Auto]
READ To READ Delay(DD) 7 [Auto]
READ To READ Delay(DR) 6 [Auto]
READ To READ Delay(SR) 4 [Auto
]WRITE To WRITE Delay(DD) 8 [Auto]
WRITE To WRITE Delay(DR) 8 [Auto]
WRITE To WRITE Delay(SR) 18 [Auto]
CPU Differential Amplitude [Auto]
CPU Clock Skew [Auto]
IOH Clock Skew [Auto]
Extreme Engine Digi+
Digi+ PWR Mode
[T-Balanced]
PWR Volt. Control [Auto]
Load-Line Calibration [Full]
CPU Voltege OCP [Enabled]
CPU PWM Frequency [1000kHz]
Extreme OV [Disabled]
Extreme OC [Auto]
CPU Voltage 1.250 [1.25000]
CPU PLL Voltage 1.812 [Auto]
QPI/DRAM Core Voltage 1.350 [1.35000]
DRAM Bus Voltage 1.654 [Auto]
>DRAM REF Voltages
DRAM DATA REF Voltage on CHA [Auto]
DRAM CTRL REF Voltage on CHA [Auto]
DRAM DATA REF Voltage on CHB [Auto]
DRAM CTRL REF Voltage on CHB [Auto]
DRAM DATA REF Voltage on CHC [Auto]
DRAM CTRL REF Voltage on CHC [Auto]
IOH Voltage 1.244 [Auto]
IOH PCIE Voltage 1.508 [Auto]
ICH Voltage 1.111 [Auto]
ICH PCIE Voltage [Auto]
Spread Spectrum Control CPU Spread Spectrum [Disabled]
DRAM Spread Spectrum [Disabled]
***on-board jumper dependant
سوف يتم اضافة المزيد من القوالب تباعا
وذلك لتسهيل عملية الشرح من خلال هذه ال قوالب
و ستكون هذه القوالب على الوضع الافتراضى كل ما نقوم به هو نسخها الى الموضوع مع ذكر الاتى
1- المعالج - النوع - رقم الموديل
2- الذواكر - النوع - الموديل - التردد - الناقل
لكى تسهل على الاخوة المحترفين عملية الشرح
و سوف يتم تحديث هذه القوالب بأستمرار
سوف نبدأ اولا بلوحات GIGABYTE
بالنسبة للوحات X58
Advanced CPU Features:
CPU Clock Ratio ................................ [20x]
Intel(R) Turbo Boost Tech .................. [Enabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Enabled]
CPU Enhanced Halt (C1E) ................... [Disabled]
C3/C6/C7 State Support .................... [Disabled]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ............................ [Disabled]
Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
Bi-Directional PROCHOT ..................... [Enabled]
Uncore & QPI Features:
QPI Link Speed .............................. x36
Uncore Frequency .......................... (Always 2x memory Multi or 2x +1)
Isonchronous Frequency ..................[Enabled]
Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) .....................
PCI Express Frequency (MHz) ........... [100]
C.I.A.2 [Disabled]
Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]
Advanced DRAM Features:
Performance Enhance ...................... [Standard]
Extreme Memory Profile (X.M.P) ......... [Disabled]
System Memory Multiplier (SPD) ........ [AUTO]
DRAM Timing Selectable (SPD) .......... [Manual]
Channel A + B + C
Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................
tRCD .......................................
tRP .........................................
tRAS .......................................
##Channel A Advanced Timing Control##
tRC ........................................ (Should be = tRAS + tRP or above for stability)
tRRD .......................................
tWTR ...................................... (Must be Write to Read Delay/Same Rank - (tWL + 4)
tWR ........................................
tWTP ....................................... (tWTP Must = tWR + tWL + 4)
tWL ........................................ (tWL Must be CAS Latency -1)
tRFC .......................................
tRTP .......................................
tFAW ......................................
Command Rate (CMD) ................
##Channel A Misc Timing Control##
Round Trip Latency ...................
B2B CAS Delay ..........................
Advanced Voltage Control:
CPU
Load Line Calibration ................. [Disabled]
CPU Vcore ...............................
QPI/VTT Voltage 1.150v ............
CPU PLL 1.800v .......................
MCH/ICH
PCIE 1.500v ...........................
QPI PLL 1.100v .......................
IOH Core 1.100v .....................
ICH I/O 1.500v .......................
ICH Core 1.1v ........................
DRAM
DRAM Voltage 1.500v ..............
DRAM Termination 0.750v [AUTO]
Ch-A Data VRef. 0.750v [AUTO]
Ch-B Data VRef. 0.750v [AUTO]
Ch-C Data VRef. 0.750v [AUTO]
Ch-A Address VRef. 0.750v [AUTO]
Ch-B Address VRef. 0.750v [AUTO]
Ch-C Address VRef. 0.750v [AUTO]
اما اللوحات P55 & P57
Advanced Frequency Settings:
CPU Clock Ratio 21x
Advanced Core Features [Press Enter]:
Intel(R) Turbo Boost Tech................[Disabled]
CPU Cores Enabled........................[All]
CPU Multi-Threading......................[Disabled]
CPU Enhanced Halt (C1E)..................[Auto]
C3/C6/C7 State Support...................[Auto]
CPU Thermal Monitor......................[Auto]
CPU EIST Function........................[Auto]
Bi-Directional PROCHOT...................[Auto]
QPI Clock Ratio..........................[Auto]
QPI Link Speed........................[x]
Uncore Clock Ratio....................[18x]
Uncore Frequency.........................3600MHz
>>>>> Standard Clock Control <<<<<
Base Clock (BCLK) Control................[Enabled]
BCLK Frequency ..........................[200]
Extreme Memory Profile (X.M.P.)..........[Disabled]
System Memory Multiplier (SPD)...........[Disabled]
Memory Frequency (MHz)................2000
PCI Express Frequency (MHz)..............[Auto]
C.I.A.2..................................[Disabled]
>>>>> Advanced Clock Control <<<<<
CPU Clock Drive..........................[ 800mV]
PCI Express Clock Drive..................[ 900mV]
CPU Clock Skew...........................[ 0ps]
Advanced Memory Settings:
Extreme Memory Profile (X.M.P.)..........[Disabled]
System Memory Multiplier (SPD)...........[10.0]
Memory Frequency (MHz)................2000
Performance Enhance (SPD)............. [Turbo]
DRAM Timing Selectable (SPD)............ [Expert]
Profile DDR Voltage ..................
Profile QPI Voltage ..................
Channel Interleaving.....................[Auto]
Rank Interleaving........................[Auto]
>>>>> Channel A & B
Channel A Timing Settings [Press Enter]:
Cas Latency Time........................[8]
tRCD....................................[8]
tRP.....................................[9]
tRAS...................................[24]
>>>>> Advanced Timing Control
tRC....................................[Auto]
tRRD...................................[Auto]
tWTR...................................[Auto]
tWR....................................[Auto]
tWTP...................................[Auto]
tWL....................................[Auto]
tRFC...................................[Auto]
tRTP...................................[Auto]
tFAW...................................[Auto]
Command Rate (CMD).................. 1 [1]
>>>>> Misc Timing Control
B2B Cas Delay..........................[Auto]
Round Trip Latency.....................[Auto]
Channel A Turnaround Settings [Press Enter]:
Different DIMMs........................[Auto]
Different DIMMs........................[Auto]
On The Same Rank.......................[Auto]
>>>>> Channel A Writes Followed By Writes
Different DIMMs........................[Auto]
Different DIMMs........................[Auto]
On The Same Rank.......................[Auto]
Advanced Voltage Settings:
******Mother Board Voltage Control ******
Voltage Types............Normal......Current
--------------------------------------------
>>> CPU
Load Line Calibration...................[Level 2]
CPU Vcore..................1.19375v..[1.xv]
QPI/VTT Voltage..........1.100v.....[1.x00v]
>>> MCH/ICH
PCH Core....................1.050v.....[Auto]
CPU PLL......................1.800v.....[Auto]
>>> DRAM
DRAM Voltage..............1.500v.....[1.660v]
DRAM Termination.........0.750v.....[Auto]
Ch-A Data VRef............0.750v.....[Auto]
Ch-A Data VRef............0.750v.....[Auto]
Ch-B Data VRef............0.750v.....[Auto]
Ch-B Data VRef............0.750v.....[Auto]
Miscellaneous Settings:[/SIZE]
Isochronous Support....................[Enabled]
Virtualisation technology..............[Enabled]
USB Storage Detect ....................[Disabled] Located In Integrated Peripherals Page
P45 / P43
وأيضا متشابهة الى حد ما مع G45/G43
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto or Fast
CPU Clock Ratio ..........................:
Fine CPU Clock Ratio.....................:.0
CPU Frequency ...........................:
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: Mhz
PCI Express Frequency (Mhz) .........:Set to 100
C.I.A.2 .................................:[Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: <<< 800
PCI Express Clock Drive.................: <<< 900
CPU Clock Skew (ps)....................: <<<
MCH Clock Skew (ps)...................: <<<
DRAM Performance Control
Performance Enhance...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: [Auto]
System Memory Multiplier ..............:
Memory Frequency (Mhz) ..............:
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time........................
tRCD .........................................
tRP'...........................................
tRAS..........................................
Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go
Advanced Timing Control
tRRD...........................................
tWTR..........................................
tWR............................................
tRFC...........................................
tRTP...........................................
Command Rate (CMD) ....................:2
Driving Strength Profiles
Driving Strength ............................
Channel A
Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
Channel B
Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
Motherboard Voltage Control
CPU
CPU Vcore….……….........................:Auto if not overclocking, if you are overclocking please do find and set your own voltages
CPU Termination…..... 1.200V*.......: << If overclocking Please set to stock, Auto overvolts this way to much. Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore. Auto is fine if not overclocking
CPU PLL…………………....1.500V*.......: << If overclocking Please set to stock, Auto overvolts this way to much. Optimal range for overclock would be 1.5-1.65. Auto is fine if not overclocking
CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly
CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly
MCH/ICH
MCH Core…………….....1.100V...........: <<
MCH Reference….…….0.760V...........; <<< Leave
MCH/DRAM Ref.…......0.900V...........: <<< Leave
ICH I/O……………….....1.500V............: <<< Leave
ICH Core…………...……1.100V............: <<< Leave
DRAM
DRAM Voltage ……....1.800V............:
DRAM Termination .…0.900V............: <<< Leave
Channel A Reference 0.900V............: <<< Leave
Channel B Reference 0.900V............: <<< Leave
Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
Integrated Peripherals
Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
X35 / X38 / X48
و ايضا تتشابه مع P31/G31/965P
Robust Graphics Booster___________ [Auto]
CPU Clock Ratio ____________ [8]
Fine Clock Ratio ____________[0.5]
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ [450]
PCI Express Frequency (Mhz)_______ [100]
C.I.A. 2__________________________ [Disabled]
System Memory Multiplier (SPD)____ [2.00]
DRAM Timing Selectable_______ SPD __ [Manual]
Performance Enhance = [Standard]
CAS Latency Time________________
Dram RAS# to CAS# Delay_________
Dram RAS# Precharge Delay_______
Precharge Delay (tRAS)__________
ACT to ACT Delay (tRRD)_________
Rank Write to READ Delay________
Write to Precharge Delay_________
Refresh to ACT Delay______________
Read to Precharge Delay__________
Static tRead Value_______________
Static tRead Phase Adjust________ [Auto]
CPU/PCIEX Clock Driving Control [800mV]
CPU Clock Skew Control [normal]
GMCH Clock Skew Control [Normal]
System Voltage Control____ [Manual]
DDR2 OverVoltage Control__ [+0.300V]
PCI-E OverVoltage Control_ [+0.1V]
FSB OverVoltage Control___ [+0.1V]
(G)MCH OverVoltage Control [+0.1V]
CPU Voltage Control_______ [1.25]
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
Integrated Peripherals
Legacy USB Storage Detect___________________[Disabled] *Note* Must be enabled to flash from USB
ننتقل الى Asus Rampage III Extreme
Target CPU Frequency 2666MHz
Target DRAM Frequency 1603MHz
LN2 Mode: Disabled***
QPI Loadline Calibration: Enabled
***Sync Mode [Enabled]
AI Overclock Tuner [Manual]
OC From CPU level Up [Auto]
CPU Ratio Setting [20.0]
CPU Turbo Power Limit [Disabled]
>CPU Configuration-
CPU Ratio Setting [20.0]
C1E Support [Enabled]
Hardware Prefetcher [Enabled]
Adjacent Cache Line Prefetcher [Enabled]
Intel(R) Virtualiyation Tech [Enabled]
CPU TM Function [Disabled]
Execute Disable Bit [Enabled]
Intel(R) HT Technology [Enabled]
Active Processor Cores [All]
A20M [Disabled]
Intel(R) SpeedStep(TM) Tech [Enabled]
Intel(R) C-STATE Tech [Enabled]
C State package limit setting [Auto]-
BCLK Frequency [133]
PCIE Frequency [100]
DRAM Frequency [1603]
UCLK Frequency [3209]
QPI Link Data Rate [AUTO]
Memory Configuration Protect [Disabled]
>DRAM Timing Control
CAS# Latency 9 [9]
RAS# to CAS# Delay 9 [9]
RAS# PRE Time 9 [9]
RAS# ACT Time 24 [24]
RAS# to RAS# Delay 6 [AUTO]
REF Cycle Time 110 [110]
WRITE Recovery Time 15 [15]
READ to PRE Time 9 [9]
FOUR ACT WIN Time 31 [31]
Back-To-BackCAS# Delay 0 [Auto]
Timing Mode 1N [1N]
Round Trip Latency on CHA [AUTO]
Round Trip Latency on CHB [AUTO]
Round Trip Latency on CHC [AUTO]
WRITE To READ Delay(DD) 8 [Auto]
WRITE To READ Delay(DR) 8 [Auto]
WRITE To READ Delay(SR) 18 [Auto]
READ To WRITE Delay(DD) 7 [Auto]
READ To WRITE Delay(DR) 7 [Auto]
READ To WRITE Delay(SR) 7 [Auto]
READ To READ Delay(DD) 7 [Auto]
READ To READ Delay(DR) 6 [Auto]
READ To READ Delay(SR) 4 [Auto
]WRITE To WRITE Delay(DD) 8 [Auto]
WRITE To WRITE Delay(DR) 8 [Auto]
WRITE To WRITE Delay(SR) 18 [Auto]
CPU Differential Amplitude [Auto]
CPU Clock Skew [Auto]
IOH Clock Skew [Auto]
Extreme Engine Digi+
Digi+ PWR Mode
[T-Balanced]
PWR Volt. Control [Auto]
Load-Line Calibration [Full]
CPU Voltege OCP [Enabled]
CPU PWM Frequency [1000kHz]
Extreme OV [Disabled]
Extreme OC [Auto]
CPU Voltage 1.250 [1.25000]
CPU PLL Voltage 1.812 [Auto]
QPI/DRAM Core Voltage 1.350 [1.35000]
DRAM Bus Voltage 1.654 [Auto]
>DRAM REF Voltages
DRAM DATA REF Voltage on CHA [Auto]
DRAM CTRL REF Voltage on CHA [Auto]
DRAM DATA REF Voltage on CHB [Auto]
DRAM CTRL REF Voltage on CHB [Auto]
DRAM DATA REF Voltage on CHC [Auto]
DRAM CTRL REF Voltage on CHC [Auto]
IOH Voltage 1.244 [Auto]
IOH PCIE Voltage 1.508 [Auto]
ICH Voltage 1.111 [Auto]
ICH PCIE Voltage [Auto]
Spread Spectrum Control CPU Spread Spectrum [Disabled]
DRAM Spread Spectrum [Disabled]
***on-board jumper dependant
سوف يتم اضافة المزيد من القوالب تباعا