poop100
11-10-2013, 03:45
السلام عليكم ورحمة الله وبركاته
وجدت هذا الشرح في أحد المواقع الأجنبيه
أرجو من أصاحب الخبرة يفيدوني بالخطوات الي لازم أعملها
Install Method: iBoot Legacy 2.7.2 + Retail 10.6.0 DVD. MultiBeast + Combo Update 10.6.8
Processor: Core i3 M350 (@2.27)
Audio: Conexant CX20671 (14F1:5069) - works with VoodooHDA (HDAEnabler kexts seem to cause a Kernel Panic)
WLAN: Broadcom BM4313 (14E4:4727) Wireless + Bluetooth not yet working. The BM34xx kext just smiles politely and does nothing - will update this when it works)
LAN: Atheros AR8152 (1969:2060) Ethernet (AtherosL1cEthernet.kext seems to work. Using 64bit version 1.0.1b9 (compiled 2010/04/25))
Video: ATI Radeon Mobility HD 5145 (give up hoping for this to work correctly - can make it work with VESA framebuffer though - still working on this)
SATA: Intel Series 5/3400 AHCI works natively
Optical: Swapped in an HP Blu-Ray drive (SATA) functions well.
----------------------------------------------------------------------------------
How to install:
Remove all but 4GB RAM (or less), disable built-in ethernet.
Boot via iBoot Legacy disk with "-v -x" flags (GraphicsEnabler=No/Yes made no difference but you may require the No option).
Swap disc when required and install to your liking (I went for a minimal install).
Replace iBoot disc and reboot with "-v -x GraphicsEnabler=No"
Remove IOPlatformPluginFamily.kext from /System/Library/Extensions/ (this is so that the combo update won't panic and kill your install).
Reboot - usual flags "-v -x GraphicsEnabler=No"
Launch the MultiBeast installer and proceed to the install options screen - but DO NOT actually click install yet.
Run combo updater but DO NOT click the restart button when finished (if you do you need to go back to step one and begin again).
Flick back to MultiBeast and click the Install button now. When complete allow the Combo update to restart.
You know what to type now... but we shall soon avoid needing to do that.
Install Chameleon (use the installer package and then update files manually if you really want). Edit the /Extras/org.chameleon.Boot.plist file and add in our Kernel Flags in the appropriate places (there are guides out there to help with flags). From this point on safe mode (-x) doesn't seem needed, but GraphicsEnabler=No is a MUST.
Drop the latest ATI kexts into the /System/Library/Extensions folder (I'm using atibeta4).
Remove HDAEnabler kexts from the extensions folder while you are at it.
Rebuild the cache (if you want to) "sudo kextcache -m /System/Library/Extensions.mkext -z /System/Library/Extensions"
Pray to whatever deity you hold dear and restart your machine.
If it booted you are on the right track. Power off. Add back in your RAM, enable builtin Ethernet.
Use Kext Helper b7 (or whatever you like) to install AtherosL1cEthernet.kext and then reboot. Play on internet. :)
وجدت هذا الشرح في أحد المواقع الأجنبيه
أرجو من أصاحب الخبرة يفيدوني بالخطوات الي لازم أعملها
Install Method: iBoot Legacy 2.7.2 + Retail 10.6.0 DVD. MultiBeast + Combo Update 10.6.8
Processor: Core i3 M350 (@2.27)
Audio: Conexant CX20671 (14F1:5069) - works with VoodooHDA (HDAEnabler kexts seem to cause a Kernel Panic)
WLAN: Broadcom BM4313 (14E4:4727) Wireless + Bluetooth not yet working. The BM34xx kext just smiles politely and does nothing - will update this when it works)
LAN: Atheros AR8152 (1969:2060) Ethernet (AtherosL1cEthernet.kext seems to work. Using 64bit version 1.0.1b9 (compiled 2010/04/25))
Video: ATI Radeon Mobility HD 5145 (give up hoping for this to work correctly - can make it work with VESA framebuffer though - still working on this)
SATA: Intel Series 5/3400 AHCI works natively
Optical: Swapped in an HP Blu-Ray drive (SATA) functions well.
----------------------------------------------------------------------------------
How to install:
Remove all but 4GB RAM (or less), disable built-in ethernet.
Boot via iBoot Legacy disk with "-v -x" flags (GraphicsEnabler=No/Yes made no difference but you may require the No option).
Swap disc when required and install to your liking (I went for a minimal install).
Replace iBoot disc and reboot with "-v -x GraphicsEnabler=No"
Remove IOPlatformPluginFamily.kext from /System/Library/Extensions/ (this is so that the combo update won't panic and kill your install).
Reboot - usual flags "-v -x GraphicsEnabler=No"
Launch the MultiBeast installer and proceed to the install options screen - but DO NOT actually click install yet.
Run combo updater but DO NOT click the restart button when finished (if you do you need to go back to step one and begin again).
Flick back to MultiBeast and click the Install button now. When complete allow the Combo update to restart.
You know what to type now... but we shall soon avoid needing to do that.
Install Chameleon (use the installer package and then update files manually if you really want). Edit the /Extras/org.chameleon.Boot.plist file and add in our Kernel Flags in the appropriate places (there are guides out there to help with flags). From this point on safe mode (-x) doesn't seem needed, but GraphicsEnabler=No is a MUST.
Drop the latest ATI kexts into the /System/Library/Extensions folder (I'm using atibeta4).
Remove HDAEnabler kexts from the extensions folder while you are at it.
Rebuild the cache (if you want to) "sudo kextcache -m /System/Library/Extensions.mkext -z /System/Library/Extensions"
Pray to whatever deity you hold dear and restart your machine.
If it booted you are on the right track. Power off. Add back in your RAM, enable builtin Ethernet.
Use Kext Helper b7 (or whatever you like) to install AtherosL1cEthernet.kext and then reboot. Play on internet. :)