Offer -->>How to add Loopback with dynamips. Awesome [الأرشيف]

Protocol

05-07-2007, 11:00

i want to explain how we can add Loopback to work with Dynamips ( another interface).

First Step
add a new loopback with the " Add new hadware " from your control panel.

https://grm.m.walla.co.il/briefcase/00f3/l/i/n/d/o/w/s/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/r/200706041110533758/200707051145528671/1.jpg

https://grm.m.walla.co.il/briefcase/00f3/l/i/n/d/o/w/s/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/r/200706041110533758/200707051146005027/2.jpg

https://grm.m.walla.co.il/briefcase/00f3/l/i/n/d/o/w/s/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/r/200706041110533758/200707051146113625/3.jpg

https://grm.m.walla.co.il/briefcase/00f3/l/i/n/d/o/w/s/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/r/200706041110533758/200707051146199450/4.jpg

https://grm.m.walla.co.il/briefcase/00f3/l/i/n/d/o/w/s/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/r/200706041110533758/200707051146294561/5.jpg

https://grm.m.walla.co.il/briefcase/00f3/l/i/n/d/o/w/s/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/r/200706041110533758/200707051146443935/6.jpg

https://grm.m.walla.co.il/briefcase/00f3/l/i/n/d/o/w/s/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/r/200706041110533758/200707051146537374/7.jpg

https://grm.m.walla.co.il/briefcase/00f3/l/i/n/d/o/w/s/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/r/200706041110533758/200707051147012530/8.jpg

https://grm.m.walla.co.il/briefcase/00f3/l/i/n/d/o/w/s/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/r/200706041110533758/200707051147114818/9.jpg

second Step

copy your network id from " network device list"

https://grm.m.walla.co.il/briefcase/00f3/l/i/n/d/o/w/s/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/@/r/200706041110533758/200707051153019707/10.jpg

Third Step

create this configuratio

autostart = False

[mycomp]

[[3640]]
image = c:\Program Files\Dynamips\images\c3640-i-mz.120-28a.BIN
#npe = npe-400
ram = 160

[[ROUTER R1]]
console = 2001
model = 3640
s1/0 = R2 s1/0
f0/0 = SW1 1

[[ROUTER R2]]

[[ethsw SW1]]
1 = access 1
2 = access 1 NIO_gen_eth:\Device\NPF_{513633F8-417A-49D6-A9C0-E0CDE1279388}

Fourth Step

start dynamips and configure ip address on R1 in E0 with 192.168.1.1 /24 ( example ) and configure your Loopback with the same subnet.
after that try to Ping it.