بليززززززززز محتاج مساعده

[salleh]

بليززززز محتاج تعريف scanner acer prisa 320p على xp
وجربت تعريفات كتير بس مش عاوزه تشتغل
والرساله ديه بتطلع على طول
the computer cannot detect the scanner or camera please make sure the device is turned on and properly connected to the computer
بالرغم من انها كل حاجه متوصله

[alnasir2]

السلام عليكم

جرب هذا التعريف

ftp://12.145.38.159/scanner/drivers/parallel/mirascanv3424p.zip


وترجم هذه التوجيهات

There is only one instruction from Acer dealing with how to make their parallel port scanners work in Windows XP.... most parallel port scanners don't like Windows XP very well. This method works for some folks but not everyone.

Instructions for installing Acer brand parallel port scanners in Windows XP:

For this driver to work in XP you must install the MiraScan software then install the scanner manually.

Step 1. Download MiraScan v3.424 from the web : Mirascan_v3424p.exe (ftp://12.145.38.159/scanner/drivers/parallel/mirascanv3424p.zip)

Step 2. Unzip and install the Mira Scan driver that you just downloaded. After installation , system will suggest you to add a scanner

Step 3. Then, add an imaging device

Step 4. Then the Scanner and Camera Installation Wizard comes up. Click Next at the bottom.

Step 5. Then on Scanner and Camera Installation Wizard screen it will ask you which scanner or camera do you want to install? You want to go where it says Manufacturer and then click on EPPSCANNER and where it says Model it should say color flatbedscanner. Make sure it is highlighted, also. Click on Next at the bottom.

Note: For additional screen shots of this procedure and installation procedures, please read the pdf file posted here: scpinwxp-eng.pdf (ftp://12.145.38.159/scanner/manuals/scpinwxp-eng.pdf)
The Screenshots show to be for Mirascan v3.423 but procedure is same for v3.424
Note: Adobe Acrobat Reader is required to view or print this file.