موضوع الريستارت ده اساسي متقلقش منه انا اي حاجة بعملها بعمل ريستارت او على اﻻقل reload
عملت زي مانتا قلت خليتهم فوقيه بس لسه برضه ال RDP مشتغلش برضه
موضوع الريستارت ده اساسي متقلقش منه انا اي حاجة بعملها بعمل ريستارت او على اﻻقل reload
ممممممم
ضيف
acl SSL_ports port 563 # snews
acl SSL_ports port 873 # rsync
منفعش اقرا ال log
مفيش حاجه في ال log
اتاكد ان البرنامج بيوصل لل squid على البورت المطلوب
انت بتستخدم برناج ايه مش عارف؟
هستاذنك تجرب الخطوات اللى فى اللينك ده
https://www.cyberciti.biz/tips/linux...uid-howto.html
وتتاكد من الconfig بتاعتك وترد عليا ..
Knowledge is belong to human
انا عندي مشكلة بس انا مش عارف اضيف الجزء ده فين
httpd_accel_host virtual
httpd_accel_port 80
httpd_accel_with_proxy on
httpd_accel_uses_host_header on
انا جربت اضيفهم في الجزء ده بس باه بيعمل error
# HTTPD-ACCELERATOR OPTIONS
# -----------------------------------------------------------------------------
# TAG: httpd_accel_surrogate_id
# Note: This option is only available if Squid is rebuilt with the
# -DUSE_SQUID_ESI define
#
# Surrogates (https://www.esi.org/architecture_spec_1.0.html)
# need an identification token to allow control targeting. Because
# a farm of surrogates may all perform the same tasks, they may share
# an identification token.
#
#Default:
# httpd_accel_surrogate_id unset-id
# TAG: http_accel_surrogate_remote on|off
# Note: This option is only available if Squid is rebuilt with the
# -DUSE_SQUID_ESI define
#
# Remote surrogates (such as those in a CDN) honour Surrogate-Control: no-store-remote.
# Set this to on to have squid behave as a remote surrogate.
#
#Default:
# http_accel_surrogate_remote off
# TAG: esi_parser libxml2|expat|custom
# Note: This option is only available if Squid is rebuilt with the
# -DUSE_SQUID_ESI define
#
# ESI markup is not strictly XML compatible. The custom ESI parser
# will give higher performance, but cannot handle non ASCII character
# encodings.
#
#Default:
# esi_parser custom
مش عارف باه ممكن يتحطوا فين تاني
بالنسبة للجزء ده
acl SSL_ports port 563 # snews
acl SSL_ports port 873 # rsync
انا ضيفته بس مفيش اي حاجة اتغيرت برضه ﻻزال الريموت مش بيتشغل والي بيبان في الوج فايل كأن انا بحاول اعمل اكسيس لسايت برايل اي بي و miss direct بس
httpd_accel_port 80
غيرت ال 80 للبورت ال squid بتاعك؟
انتا قصدك هنا اغير
httpd_accel_port 80
وﻻ
http_port
الي هو اصﻻ 3128
كدا انتا لخبطتني
انتا صح
http_port 3128
وبرده ال
httpd_accel_port 3128
عشان accelerator يشتغل على نفس ال port
اهم حاجه تابع اعدادات ال ip tables الى بعتها
black ice
طيب يا جدعان محدش قالي اكتب دول فين في الفايل انا كتبتهم في المكان الي قولتكوا عليه قبل كدا والسكويد طلع ايرور ووقف خالص
httpd_accel_host virtual
httpd_accel_port 80
httpd_accel_with_proxy on
httpd_accel_uses_host_header on
حط السطور ديه تحت الشويه اللى انت بعتهم
httpd_accel_host virtual
httpd_accel_port 3128
httpd_accel_with_proxy on
httpd_accel_uses_host_header on
واتأكد ان مفيش غيرهم في squid.conf
واعمل restart
وبعت الايرور الى يظهر
المفضلات